Search results for 'K'

Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry.

Learn More

Parts needed to install a new downpipe. Fits all Gen 2 Turbocharged MINIs with 1.6 liter Prince engine.

Includes

• 3 Studs
• 3 Locking Nuts
• Flange Gasket (Turbo to downpipe)
• V-Band Clamp & Gasket (Downpipe to exhaust system)

Learn More

Improve the MINI's breathing capacity by replacing all the restricted intake hose with larger and smoother high flowing parts. We have bundled together in one kit the M7 Speed Intake Hose, Hot Side Turbo Charge Pipe and the Cold Side Elbow Kit. Offered four M7 colors (BLACK, RED, BLUE and GREEN). These are direct bolt-on high performance parts offering superior durability, much better airflow and virtually unlimited service life. In addition to outstanding performance they look super cool and adds to the under hood WOW factor your MINI so desperately needs. Learn More

Replacement M7 Speed Oil Catch Can Hose Kit | R55-R57 N14 Engine | 90-1066 Learn More

These Innovate MTX Series digital air/fuel ratio gauge kits are the only 100% digital wideband air/fuel ratio technologies on the market. Their patented DirectDigital technology makes them faster and more accurate than common UEGO gauges. The gauges feature a water-resistant casing, interchangeable faceplates and bezels, and two fully programmable linear analog outputs for use with aftermarket engine management systems and data loggers.

Learn More

Replacement end for MAXX-G Sway Bar Links. M12-1.25 thread with M10-1.25 straight articulating stud. Learn More

MAXX-G Suspension Products-LIMITED LIFETIME WARRANTY

200-225mm center to center length. Recommended for the rear of lowered (1"-1.5") MINIs R55 through R59

Add more cornering performance, bind free suspension travel, better suspension alignment and adjustability to your MINI. The MAXX-G adjustable swaybar endlinks manufactured by M7 Speed feature forged alloy steel sealed and permanently lubricated OEM style ball stud & socket ends for easy installation and a military grade aluminum adjuster sleeve with opposing 12mm diameter RH & LH threads to make length adjustments a simple task. Made in the USA!

Proper length kits available for all applications-Download the fitment chart to select the correct length for your application. Click Here

Learn More

Tired of the sever understeer your MINI develops when pushing hard through the corners. This is a simple problem to correct. Simply add a larger diameter rear anti-roll bar and shift the MINI's balance from understeer towards neutral. 

Learn More

The WeatherTech FloorLiner accurately and completely lines the interior carpet giving "absolute interior protection"!  The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the Gen 2 MINI Cooper / Cooper S’s footwell.  Digital laser measurements of interior surfaces offer a consistently perfect fit!

Learn More

Rear Anti-Roll Bar by MAXX-G Performance Suspension | R60 Countryman & R61 Paceman. The MAXX-G™ brand of performance suspension, named for MAXIMUM GRIP and MAXIMUM CORNERING G-FORCE are engineered to get the most fun and performance out of your MINI. (MAXIMUM GRINS!) Our ANTI-ROLL-KITs reduce body roll through their increased design stiffness over stock bars. The result: increased roll-stiffness, reduced body roll, more positive handling and added cornering grip in any performance-driving situation. The addition of a MAXX-G rear sway bar is the quickest and easiest way to make drastic improvements to handling, body roll control, and make your MINI more fun to drive. Available in 19mm solid or 22mm hollow configuration.  Comes complete with new urethane bushings and installation instructions for a complete and effective high performance upgrade.

Learn More

Replace your old, heat damaged and power robbing leaky intercooler connector boots with a set of brand new set of M7 Speed 100% silicone boots. Available in Black, Red, Green or Blue for a little added under hood WOW ! Easy to install. A must have for modified and high boost engine builds. No special tools or skills needed.

Learn More

The WeatherTech FloorLiner accurately and completely lines the interior carpet giving "absolute interior protection"!  The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the Gen 2 Countryman’s footwell.  Digital laser measurements of interior surfaces offer a consistently perfect fit!

Learn More

FEED YOUR MACHINE MORE AIR FOR MORE POWER!

This kit combines the M7 Speed COLD SIDE Intercooler Elbow Kit with its very popular HOT SIDE Charge pipe. Together this intercooler pipe kit provides the highest flow and lowest pressure drop from the turbo to the throttle body. More Air = More Power!

Learn More

Easy Bolt-On Mod. Adds Horsepower!

Highest HP gain per $$ you can buy for the MINI Gen 2 Turbo engine. Simple installation and WOW effect! Available in RED | BLUE | BLACK | GREEN

Learn More

The WeatherTech FloorLiner accurately and completely lines the interior carpet giving "absolute interior protection"!  The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the Gen 3 F55’s 4-Door footwell.  Digital laser measurements of interior surfaces offer a consistently perfect fit! Available in four colors [Black, Cocoa, Tan, Gray]

Learn More

Wilwood’s stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses. Made to fit Wilwood Brakes Calipers Only!

Learn More

Electric Water Temperature Gauge Kit by Autometer Stark white dials, bright orange pointers and subtle black bezels make this extensive high performance line the perfect match for any application.

Learn More

New Cold Side Lower Intercooler Elbow for all Generation 2 MINI Coopers equipped with a 1.6 liter turbocharged engine. This new OE direct replacement elbow is made from the same high quality four-ply fabric reinforced 100% silicone material as our other very popular silicone hose products. While the shape and size match the factory piece the M7 elbow differs in one big way. Since the M7 part is made on mandrel tooling the bend is much smoother, more cosistant in shape and larger than the convoluted molded rubber OE part. 

This is a direct factory OE replacement part with no modifications required for installation. It replaces the OE rubber elbow that fails over time because of age, reaction with oils, high boost applications and environmental damage or punctures from underbody run-ins with road hazards.  Perfect for high performance MINIs who are running increased boost.  Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit comes complete with one silicone elbow and two high quality lined stainless steel clamps.  Currently only available in BLACK. The elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.

 

Learn More

Bundle Special | Buy 1 Water Tank & 1 Power Steering Tank | SAVE $$$ & get a FREE Stant Cap

Is your coolant tank or Power Steering Tank leaking? It is or it will be because the Gen 1 MINI suffers from a design flaw.  The plastic tanks are mounted directly above the exhaust manifold. And we all know how plastic and heat do not get along. Eventually your OEM tank will fail from the heat-guaranteed. Keep your fluid where you need it most--in your car--with Canton Racing  heavy gauge aluminum tanks offered exclusively by M7 Speed. Fabricated from heavy gauge aluminum and beautifully TIG welded by American craftsman. Available in raw aluminum or matte black powder coated finish.

Learn More

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2011 and newer (LCI Facelift) R55 through R59 MINIs with a JCW front bumper cover.

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide. 

**See Tegris warranty for terms and conditions.

Learn More

Time for a MINI Cooper exhaust upgrade? The best value on the market is from BORLA®. Add this free breathing mandrel-bent genuine BORLA® Cat-Back™ system with BORLA® custom-tuned performance mufflers to your little parcel of dynamite and get some added attitude. A BORLA® exhaust system is tuned for maximum output and is one of the easiest aftermarket performance upgrades you can do to your MINI Cooper pocket rocket.

Learn More

PREVENTS CARBON BUILD-UP

Filter out the performance robbing oil mist in your crankcase vent system. This oil mist creates an oil film in critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical to maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance. Install an M7 "Engineered...Tested...Proven" Oil Catch Can System today!

Learn More

Going with big boost then you need to replace the old stock cylinder head bolts with a set of ARP super high strength studs to keep the cylinder head tight to the block and the head gasket inplace. ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. ARP bolts are the highest quality fasterners available.  Manufactured in the USA with american high alloy steel to exacting aerospace standards

Fit all Gen 2 MINI N12, N14, N16 and N18 engines.

Learn More

The WeatherTech FloorLiner accurately and completely lines the interior carpet giving "absolute interior protection"!  The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the Gen 3 F60 Countryman's footwell.  Digital laser measurements of interior surfaces offer a consistently perfect fit! Available in three colors [Black, Tan & Gray]

Learn More

Special Active Shocks and Struts

KONI Special ACTIVE (RED) 8245 Series, twin-tube low pressure gas shock.

Fits all Gen 2 MINI R55 through R59

The next generation of premium shock absorbers that offer superior handling without compromise. It is the latest advancement in the KONI product portfolio. Utilizing the most recent generation of KONI’s patented Frequency Selective Damping technology, it controls large body motions and cornering forces but smooths expansion joints and rough roads for improved comfort.

Learn More

Replacement hardware kit for use with Hitch PN 60-160101 & 60-160201 purchased after May 1, 2016 only. 

These parts will not fit hitch PN 60-150101 & 60-150201 using M12 connection bolts.

R60 Countryman & R61 Paceman 2011-2016 JCW rear bumper cover only.

Learn More

High strength and superior quality ARP Bolt and hardened washer. Fits all Gen 1 MINI Cooper Crank Pulleys including the M7 Ultra Light weight Pulley. Learn More

Stage 1 PERFORMANCE TUNER KIT | Super East to Install | ADD upto 20 HP** to your MINI

NOW AVAILABLE FOR N14 & N18 ENGINES

 Click HERE to learn more about the Manic Tunes and required vehicle upgrades. 

Everything you need to start to add more horsepower and torque to your Gen 2 Turbo MINI. 

THE STAGE 1 PERFORMANCE TUNER KIT INCLUDES: 

• MAXXBoost Stage 1 ECU Tune - Regular Price $699.00
  
• MAXX-FLO Intake with a foam filter - Regular Price $269.00 
• Standard NGK Iridium Plus Spark Plugs (Set of 4) - Regular Price $74.99 
  
• Additional options available for a custom look and superior performance!

 

Learn More

KONI Legendary YELLOW Series Shocks

Fits all Gen 2 MINI Coopers Series R55 through R59

Koni Shock - Sport Series: The Koni Sport "Yellow" product line is legenday in the world of motorsport.. Koni serves Sporting Drivers with a carefully designed range of sport shock absorbers. This product focuses on exceptional road holding and handling, combined with a reasonable level of driving comfort. They can also be used with spring kits to lower a vehicle up to 35mm.

Many of the Koni Sport dampers are externally adjustable by means of an adjustment knob at the top of the damper. This means you do not have to remove the damper from the vehicle to adjust the rebound forces. This enables you to fine tune the handling & ride to suit your driving style. 

Learn More