Search results for 'Hawk Performance'

Learn More

Hawk 2007-2014 MINI Cooper R56 (R55 through R59) Cooper S HPS 5.0 Front Brake Pads. High Performance Street 5.0 Compound Learn More

Front & Rear Brake Service Kit

The Kit Includes

• Front & rear Cross Drilled / Slotted  rotors
• Front & rear Hawk HPS 5.0 pads (High Performance Street 5.0 Compound)
• New Front & rear pad wear sensor
• (4) MINI OEM rotor screws

Fits all Gen 3 MINIs F55, F56, F57  Base & S Models

Not compatible with JCW equipped MINIs

Learn More

NEW Lower Price

Will support up to 290 HP at 90% duty cycle.

These authentic Bosch 550cc high-impedance injectors flow 52 lbs/hr (550cc/min) at 43.5 PSI (3 BAR) and more at higher PSI. They are designed for high-performance applications and are not suggested for your MINI unless you plan to have the ECU tuned. Kit includes four brand new Bosch 550cc injectors and four custom electrical adapters to convert the Bosch fuel injector to the factory MINI loom (Siemens Fuel Injector. Will support up to 290 HP at 90% duty cycle.

These Bosch 550CC units have been proven to be the answer for the higher output 1.6L generation 1 MINIs. 44% more fuel flow than standard JCW 380cc injectors & 67% more fuel flow than standard "S" injectors. Will support up to 290 HP at 90% duty cycle.

 

 

Learn More

Have you ever noticed how crisp and responsive your car was after that initial warm-up period, and wanted to keep that feeling for the rest of the day? The M7 180 deg F [82 deg C] Thermostat is the solution. Not only does the engine maintain its fresh-start power, but also the under-hood temperatures are greatly diminished.

Learn More

The ORIGINAL and STILL THE BEST C.A.I. ON THE MARKET!

NOW C.A.R.B. EO #D-766 listed. Legal for use in all 50 States

The M7 Speed R53 Cold Air Box replaces the factory air box with this Made in The USA high quality aftermarket kit. It bolts directly to the factory base and draws unrestricted cool outside high pressure air from the left side vent at the base of the windshield. This M7 Speed "Exact-Fit" certified product bolts right into place with no cutting or modifying required. Easy to install and proven to work.

Learn More

Cut down on the ever-destructive under hood heat in the engine compartment without adding complex, hard to install parts. The M7 Exhaust Heat Shield is custom contoured and fits on top of the factory aluminum heat shield above the exhaust manifold or header of your R50, R52 or R53 MINI Cooper.

Learn More

POWER PAK for GEN 1 MINIs

GEN 1 Power Pak Includes:

• M7 Speed 16% Overdrive Supercharge Pulley
• NGK Iridium Spark Plugs
• New Micro-V Supercharger Drive Belt
• Optional: M7 Speed 180 Deg F (82 Deg C) Thermostat  
  
• Optional: MSD Coil 
• Optional: MSD Plug Wires
• Optional: Belt Tensioner Assembly

SAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY!

With well over a decade of experience, the tuning experts at M7 have carefully hand picked these components to work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.

 

Learn More

NEW Lower Price!

The M7 Speed Stage I Ignition Pak for all Generation 1 MINIs includes a high performance MSD Blaster Coil (36,000 volts), MSD 8.5 mm high performance spark plug wires and your choice of high performance NGK Iridium Spark Plugs (set of 4 - available in three different heat ranges) 

Learn More

The M7 Speed Stage I Ignition Pak for all Generation 1 MINIs includes a high performance MSD Blaster Coil (36,000 volts), MSD 8.5 mm high performance spark plug wires and one set of four NGK Iridium Spark Plugs (+1 Colder Heat Range) 

Learn More

Designed specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. Factory Heat Range Sold in a set of 4. Fits Gen 1 MINI Coopers (2002-2006 R53S & 2005-2008 R52S) Learn More

+1 Heat range colder than stock. Recommended for extended high RPM use applications on modified engines. Designed specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. Fits Gen 1 MINI Coopers (2002-2006 R53S & 2005-2008 R52S)

Learn More

+2 Heat range colder than stock. Recommended for extended high RPM racing applications on highly modified engines. Designed specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. These spark plugs fit Gen 1 MINI Coopers (2002-2006 R53S & 2005-2008 R52S)

Learn More

When using the Stock Crank Pulley ot the M7 Tuning 2% Crank pulley and 16% Supercharger pulley together, it is recommended to use a shorter drive belt or risk slipping or throwing the stock belt. M7 Tuning now offers a shorter-than-stock high performance drive belt that works perfectly with both pulleys! Comparable to the factory MINI JCW belt. 1379mm long.

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

Learn More

Super conducting, cool looking and high performing 8.5mm ignition wires for your 1.6L MINI Cooper. Bright red silicone insulating jacket adds underhood good lookss as well as true performance.

Learn More

This direct bolt-on replacement coil from MSD intensifies the spark output of your ignition. At 35,000 volts, the MSD coil adds the extra spark energy needed to fire high cylinder pressure mixtures developed by today's modified and supercharged engines. Manufactured by the world leader in high performance ignition and engine electronics -- MSD! Easy DIY project.

Learn More

These Innovate MTX Series digital air/fuel ratio gauge kits are the only 100% digital wideband air/fuel ratio technologies on the market. Their patented DirectDigital technology makes them faster and more accurate than common UEGO gauges. The gauges feature a water-resistant casing, interchangeable faceplates and bezels, and two fully programmable linear analog outputs for use with aftermarket engine management systems and data loggers.

Learn More

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2001-2006 R50 and R53 MINIs with a standard bumber. Also fits all 2005-2008 R52 and R52S MINIS with standard front bumper

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide.  Add down force and killer looks to your MINI in a few hours of easy DIY work.

**See Tegris warranty for terms and conditions.

Learn More

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2001-2006 R50 and R53 MINIs with a factory JCW bumper. Also fits all 2005-2008 R52 and R52S MINIS with a factory JCW front bumper

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide.  Add down force and killer looks to your MINI in a few hours of easy DIY work.

**See Tegris warranty for terms and conditions.

Learn More

MAXX-G Suspension Products

Add more cornering performance, bind free suspension travel, better suspension alignment and adjustability to your MINI. The MAXX-G adjustable swaybar endlinks manufactured by M7 Speed feature forged alloy steel sealed and permanently lubricated OEM style ball stud & socket ends for easy installation and a military grade aluminum adjuster sleeve with opposing 12mm diameter RH & LH threads to make length adjustments a simple task. Made in the USA!

Proper length kits available for all applications-Download the fitment chart to select the correct length for your application. Click Here

Learn More

The M7 Strut Tower Brace for the R53 was the industry's first and still the best add on suspension kit. Helps improve overall handling AND prevents strut tower mushrooming problems. Solve two problems with one part. Simple to install & top quality.

Learn More

Highest HP gain per $$ you can buy for the MINI Turbo engine. Simple installation and WOW effect! Available in RED | BLUE | BLACK

Learn More

Color RED

Highest HP gain per $$ you can buy for the MINI Turbo engine. Simple installation and WOW effect! Available in RED | BLUE | BLACK | New GREEN

Learn More

New Color Available  BLUE

Highest HP gain per $$ you can buy for the MINI Turbo engine. Simple installation and WOW effect! Available in RED | BLUE | BLACK | New GREEN

Learn More

 

The J-Brace from M7 Tuning is exactly what MINI enthusiasts worldwide have been waiting for: a brace that stiffens up the front end, protects the strut towers from mushrooming, and looks great to boot!
This is our best selling, best fitting and best looking strut tower brace for the R56 family of MINI Coopers. Installs in minutes and clears all factory air boxes including the JCW version!

Learn More

Represent M7 with a set of 22" diameter logo decals as seen on our company and project cars. If you're off to an event (car meet, track day, lunch, etc.) let them know you're serious about the performance parts you install on your car. COLOR: Matte Silver Learn More

Represent M7 with a set of 22" diameter logo decals as seen on our company and project cars. If you're off to an event (car meet, track day, lunch, etc.) let them know you're serious about the performance parts you install on your car.

COLOR: Gloss BLACK

Learn More

Represent M7 with a set of 22" diameter logo decals as seen on our company and project cars. If you're off to an event (car meet, track day, lunch, etc.) let them know you're serious about the performance parts you install on your car.

COLOR: Gloss WHITE

Learn More

Represent M7 with a set of 22" diameter logo decals as seen on our company and project cars. If you're off to an event (car meet, track day, lunch, etc.) let them know you're serious about the performance parts you install on your car.

COLOR: reflective CHROME

Learn More