Search results for 'bc racing'

High Performance High Strength for RACING APPLICATIONS

• 1385mm long for use with M7 Tuning 4% Crank pulley and 16% Supercharger overdrive system.

Gates Racing Micro-V Belts. You get more than just a cool color. You get high performance, leading edge technology that's 300% stronger with three times the heat resistance of stock  belts.When using the M7 Tuning 4% Crank pulley and 16% Supercharger pulley together, it is necessary to use a shorter drive belt or risk slipping or throwing the stock belt. M7 Speed offers a correct length high performance drive belt that works perfectly with 4%/16% set-up!

Gates Racing Micro-V Belt Features:

• Precision Belt Profile. Belts are precision ground, not cut, so they fit the pulley with absolute perfection.
• Durable, Heat-resistant Overcord. The heat-resisting polyester fabric is reinforced with a patented EPDM compound.
• Super Strong Tensile Cord. High-modulus, low-stretch polyester means Herculean strength for high load-carrying capability.
• Heat Beating Undercord. Aramid reinforcement in a patented EPDM compound for three times the heat resistance and durability of standard belts.
• Specially Engineered Adhesion Layer. Our patented EPDM compound gives Gates Racing belts extended service life.

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

+2 Heat range colder than stock. Recommended for extended high RPM racing applications on highly modified engines. Designed specifically for the performance enthusiast. Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. NGK Iridium Spark Plugs have proven to be the best choice for performance minded MINI Cooper owners. These spark plugs fit Gen 1 MINI Coopers (2002-2006 R53S & 2005-2008 R52S)

NOW AVAILABLE | R60 Countryman-Pacenman Coil-Over Kit

Equally at home on the street and on the track the BR Series Coilovers from BC Racing offers the best of both worlds with ride height and damping adjustability. The BR Series offers ride heights from stock to 2 inches of drop as well as 30 levels of shock damping adjustment.

NOW AVAILABLE | Coil-Over Kit for MINI Cooper R50 and R53 

Equally at home on the street and on the track the BR Series Coilovers from BC Racing offers the best of both worlds with ride height and damping adjustability. Features Mono-tube shock design, 30 levels of dampening force adjustment, Pillowball mounts and adjustable camber plates (front only) included. Separate Full length height adjustable with up to 2 inches of drop, One year warranty and rebuildable.

Fits all Mini Cooper R50 2002-2006, Mini Cooper S R53 2002-2006. Will not fit GP

Front Spring Rate = 7k [390 #/in]    Rear Spring Rate = 5k [280 #/im]

The OS Giken Grand Touring Clutch is the latest development to the OS Giken clutch lineup and retains all the technology from the Racing Multi-plate Clutches, but with the addition of a unique “floating pressure system” to provide a smooth and chatter-free driving experience. Dampened Single Plate w/Soft Diaphragm,

Includes:

• Dampened Single Plate Clutch Assembly (clutch disc and pressure plate assembly)
• Flywheel
• Release Bearing Assembly

MAX Torque Rating 280 lb-ft

The BC Racing BR Series is the most popular suspension package offered by BC Racing. Equally at home on street and track the BR Series offers the best of both worlds with ride height and damping adjustability. Damping is adjusted simultaneously and height is adjusted independently of piston and spring stroke. The BR Series offers a minimum 2 inch drop* as well as 30 levels of damping adjustment. Fits Gen 3 MINI F55, F56, F57 WITHOU DDC Suspension.  For MINIs with DDC Suspension Click Here

The BC Racing BR Series is the most popular suspension package offered by BC Racing. Equally at home on street and track the BR Series offers the best of both worlds with ride height and damping adjustability. Damping is adjusted simultaneously and height is adjusted independently of piston and spring stroke. The BR Series offers a minimum 2 inch drop* as well as 30 levels of damping adjustment. Fits Gen 3 MINI F55, F56, F57 WITHOU DDC Suspension.  For MINIs without DDC Suspension Click Here

Stainless Steel Black Nitrated Intake Valves by Supertech

Set of 8 black nitrated 28.8mm standard diameter. (+1.0mm oversize available)

Fits 2007-2010 N14 Prince Engine

Production of Supertech racing valves begins with a one piece forging, where the head of the valve is forged under a slow two step process to keep a good material grain flow. The forging is then CNC machined in several steps to ensure the precision of the final dimensions. Then another heat treatment for stress relieving followed by a nitride hardening treatment (or coating process depending on the application). Lastly, more grinding, followed by our patented Superfinishing of the surface to ensure that each valve is free of any imperfections and the dimensions are precise.

Requires Supertech Keepers pn 56-595111.

Works with stock spring retainers

Stainless Steel Black Nitrated Intake Valves by Supertech

Set of 8 black nitrated 29.8mm standard diameter.

Fits 2011-2016 N18 MINI 1.6 liter Prince Engine

Production of Supertech racing valves begins with a one piece forging, where the head of the valve is forged under a slow two step process to keep a good material grain flow. The forging is then CNC machined in several steps to ensure the precision of the final dimensions. Then another heat treatment for stress relieving followed by a nitride hardening treatment (or coating process depending on the application). Lastly, more grinding, followed by our patented Superfinishing of the surface to ensure that each valve is free of any imperfections and the dimensions are precise.

Requires Supertech Keepers pn 56-595111.

Works with stock spring retainers

This is a brand new direct bolt-on high performance turbocharger with a 41 mm compressor wheel manufactured by Borg Warner AirWerks division. Good for up to 300 HP with high flowing aftermarket intake system parts and ECU upgrade. Backed by Borg Warner Warranty

High Performance High Strength for RACING APPLICATIONS

• 1379mm long for use with stock diameter crank pulley and M7 16% Supercharger overdrive supercharger pulley.

Gates Racing Micro-V Belts. You get more than just a cool color. You get high performance, leading edge technology that's 300% stronger with three times the heat resistance of stock  belts. When using the M7 Tuning 16% Supercharger and stock diameter crank pulley together, it is necessary to use a shorter drive belt or risk slipping or throwing the stock belt. M7 Speed offers a correct length high performance drive belt that works perfectly with your set-up!

Gates Racing Micro-V Belt Features:

• Precision Belt Profile. Belts are precision ground, not cut, so they fit the pulley with absolute perfection.
• Durable, Heat-resistant Overcord. The heat-resisting polyester fabric is reinforced with a patented EPDM compound.
• Super Strong Tensile Cord. High-modulus, low-stretch polyester means Herculean strength for high load-carrying capability.
• Heat Beating Undercord. Aramid reinforcement in a patented EPDM compound for three times the heat resistance and durability of standard belts.
• Specially Engineered Adhesion Layer. Our patented EPDM compound gives Gates Racing belts extended service life.

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

7% DISCOUNT on the complete bundled BYO TrakPak

Select at least one item from each part group below and receive an additional 7% discount off the already individually discounted prices.

These parts have been selected because of their unquestioned brand quality, proven performance and easy bolt-on fitment.  If you want to build a street warrior or track terrior that will bring home the gold metals then consider these perfectly mactch parts to build you dream project MINI.

Engineered....Tested.... and Proven.

NOW AVAILABLE | Coil-Over Kit for R55 through R59

Equally at home on the street and on the track the BR Series Coilovers from BC Racing offers the best of both worlds with ride height and damping adjustability. Features Mono-tube shock design, 30 levels of dampening force adjustment, pillowball mounts and adjustable camber plates (front only), individual corner height adjustable (up to 2 inches of drop) and a one year warranty. Shocks are rebuildable

Spring rates: Front = 7.0 KG/mm [391 #/in]   Rear = 5.0 kg/mm [280 #/in]

The AEM-29-0005 performance strut bar provides additional vehicle stability on R55 through R59 Mini Cooper S models that have the M7 Speed MAXX-Flo or AEM 21-699C cold air intake installed. AEM strut tower brace bars are constructed from 1-1/2 inch steel tubing, providing great strength and low weight which gives you a true racing option and a more professional alternative to many hinged or weaker strut bars on the market. The AEM-29-0005 performance strut bar comes in a charcoal gray powder coat finish with the AEM logo giving you a clean high-performance look under the hood. This strut bar is easy to install using the existing factory mounting points.  Easy 10 minute installation.

The M7 Speed Standard Diameter, lightweight direct replacement crank pulley will add power, acceleration and performance to your MINI. Weighing in at a scant 16.4 ounces, (an amazing 88.5% less than factory) the lightweight M7 Speed Standard Diameter Crank Pulley reduces crankshaft rotational mass which equals additional increased horsepower, torque and throttle response. This is a DIRECT REPLACEMENT PART for the factory OE crankshaft pulley which always fails. can be used on the non supercharged R50 or R52 Generation 1 MINIs or the supercharged R52S and R53 generation 1 MINIs. 

Each M7 Speed product is Engineered....Tested....and Proven to PERFORM!

Forged Alloy Steel Connecting Rods for MINI N14 Prince Engine.  Safe to 400HP plus and nitrous.   Set of 4 with piston rings and wrist pins.

Available in standard or 0.5mm oversize bore.  9.5 or 10-5 compression ratio.

CP-Carrillo engineers continually refines their piston designs to obtain that elusive goal –perfection in performance.

When you buy CP-Carrillo forged pistons you get Carrillo's commitment to the highest quality and performance, before, during and after the sale!

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2001-2006 R50 and R53 MINIs with a standard bumber. Also fits all 2005-2008 R52 and R52S MINIS with standard front bumper

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide.  Add down force and killer looks to your MINI in a few hours of easy DIY work.

**See Tegris warranty for terms and conditions.

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2001-2006 R50 and R53 MINIs with a factory JCW bumper. Also fits all 2005-2008 R52 and R52S MINIS with a factory JCW front bumper

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide.  Add down force and killer looks to your MINI in a few hours of easy DIY work.

**See Tegris warranty for terms and conditions.

BACK IN STOCK and GUARANTEED FOR LIFE!

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE**!  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2007-2010 R55 through R59 MINIs with a standard front bumper cover

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide. 

**See Tegris warranty for specific terms and conditions

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2007-2010 R55 through R59 MINIs with a JCW front bumper cover.

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide. 

**See Tegris warranty for terms and conditions.

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2011 and newer (LCI Facelift) R55 through R59 MINIs with a JCW front bumper cover.

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide. 

**See Tegris warranty for terms and conditions.

Set of 4 NGK Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. Fits Gen 1 MINI Coopers (2002-2006 R53S & 2005-2008 R52S). . 3 heat ranges available.

A larger 4% oversize speed increasing crank pulley will add just that little extra added supercharger boost and performance. This beautiful design is a result of advanced computer modeling and high precision CNC machining. Made in the USA from billet 6061-T6 aerospace grade aluminum alloy with a deep black anodize coating, the M7 Speed 4% oversize - speed increasing pulley will provide a lifetime of reliable use. Weighing in at just 13 ounces and supplied with a brand new high strength ARP bolt and precision ground flat washer, the M7 Speed 4% crank pulley is best in class. Each M7 Speed product is Engineered....Tested....and Proven to PERFORM!

Tegris Splitter for 2011-2016 MINI Countryman.  Lifetime Warranty on splitter breakage.  Comes complete with installation kit.

*****This Item is Special Order and takes normally 3-6 weeks to ship after order is placed.*****

BACK IN STOCK and GUARANTEED FOR LIFE!**

Continuing on M7's tradition of being the innovator in Ultimate Mini Performance we are the only company in the World to offer the indestructible Tegris splitter for your Mini: GUARANTEED! In fact it is GUARANTEED FOR LIFE!**  Easy-To-Install hardware kit included.  Bumper cover removal not required.

Fits all 2011 and newer (LCI Facelift) R55 through R59 MINIs with a standard bumber. 

The M7 EXTREME Tegris Front Splitter is made from Tegris material: one of the strongest and lightest composite polymers available in the world. First developed as lightweight armor shielding to protect our troops in hostile environments, it has quickly found its way onto racetracks around the world. The use of Tegris for front splitter and under body contact blocks material is already well proven in NASCAR and all forms of endurance and sports car racing worldwide. 

**See Tegris warranty for terms and conditions.

NOW COMES WITH A FREE STANDARD CAP! ($15.99 VALUE)

Is your coolant tank leaking? It is or it will be because the Gen 1 MINI suffers from a design flaw.  The plastic pressure tank is mounted directly above the exhaust manifold. And we all know how plastic and heat do not get along. Eventually your OEM tank will fail from the heat-guaranteed. Keep your coolant where you need it most--in your engine--with Canton Racing expansion tanks offered by M7 Speed. Fabricated from heavy gauge aluminum and beautifully TIG welded by American craftsman. Available in raw aluminum, matte black or gloss red.  (Colors are special order)