Engine Performance

This cable is required for use with the Bytetronik FA-Lite ECU Tuner kit and the Bytetronik Full Access FA53 Kit. It provides communication between your Bytetronik Tuner software and the Innovate A/F Gauge. Learn More

Designed specifically for the W10 and W11 1.6L R50/R52/R53 Mini Cooper engines.These Pro series cylinder head studs from ARP are cold-forged from SAE 8720 high grade alloy steel to ensure maximum strength and ZERO failure. Learn More

These Innovate MTX Series digital air/fuel ratio gauge kits are the only 100% digital wideband air/fuel ratio technologies on the market. Their patented DirectDigital technology makes them faster and more accurate than common UEGO gauges. The gauges feature a water-resistant casing, interchangeable faceplates and bezels, and two fully programmable linear analog outputs for use with aftermarket engine management systems and data loggers.

Learn More

NEW Lower Price

Will support up to 290 HP at 90% duty cycle.

These authentic Bosch 550cc high-impedance injectors flow 52 lbs/hr (550cc/min) at 43.5 PSI (3 BAR) and more at higher PSI. They are designed for high-performance applications and are not suggested for your MINI unless you plan to have the ECU tuned. Kit includes four brand new Bosch 550cc injectors and four custom electrical adapters to convert the Bosch fuel injector to the factory MINI loom (Siemens Fuel Injector. Will support up to 290 HP at 90% duty cycle.

These Bosch 550CC units have been proven to be the answer for the higher output 1.6L generation 1 MINIs. 44% more fuel flow than standard JCW 380cc injectors & 67% more fuel flow than standard "S" injectors. Will support up to 290 HP at 90% duty cycle.

 

 

Learn More

Super conducting, cool looking and high performing 8.5mm ignition wires for your 1.6L MINI Cooper. Bright red silicone insulating jacket adds underhood good lookss as well as true performance.

Learn More

This direct bolt-on replacement coil from MSD intensifies the spark output of your ignition. At 35,000 volts, the MSD coil adds the extra spark energy needed to fire high cylinder pressure mixtures developed by today's modified and supercharged engines. Manufactured by the world leader in high performance ignition and engine electronics -- MSD! Easy DIY project.

Learn More

Set of 4 NGK Iridium IX S spark plugs offer extreme ignitability, improved throttle response and superior anti-fouling. Fits Gen 1 MINI Coopers (2002-2006 R53S & 2005-2008 R52S). . 3 heat ranges available.

Learn More

POWER PAK for GEN 1 MINIs

GEN 1 Power Pak Includes:

• M7 Speed 16% Overdrive Supercharge Pulley
• NGK Iridium Spark Plugs
• New Micro-V Supercharger Drive Belt
• Optional: M7 Speed 180 Deg F (82 Deg C) Thermostat  
  
• Optional: MSD Coil 
• Optional: MSD Plug Wires
• Optional: Belt Tensioner Assembly

SAVE $$$ OVER BUYING THE PARTS INDIVIDUALLY!

With well over a decade of experience, the tuning experts at M7 have carefully hand picked these components to work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.

 

Learn More

The M7 Speed 16% overdrive pulley offers a superior shaft locking system, super light rotational weight, active belt cooling and it is designed to run flush to the supercharger housing for perfect belt alignment and reduced belt and shaft loads. No other MINI supercharger pulley on the market offers all these features. Add a M7 Speed 4% crank pulley and you have the ultimate power adder supercharger drive system available anywhere on the Planet!

Learn More

Replacement air filter element for the M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake and the R56 AGS-R Ram Air System. Learn More

The ORIGINAL and STILL THE BEST C.A.I. ON THE MARKET!

NOW C.A.R.B. EO #D-766 listed. Legal for use in all 50 States

The M7 Speed R53 Cold Air Box replaces the factory air box with this Made in The USA high quality aftermarket kit. It bolts directly to the factory base and draws unrestricted cool outside high pressure air from the left side vent at the base of the windshield. This M7 Speed "Exact-Fit" certified product bolts right into place with no cutting or modifying required. Easy to install and proven to work.

Learn More

Add a water temperature gauge to your MINI. Easy to install. Accepts any standard 1/8" NPT (1/8" pipe) temperature sending unit. Learn More

NEW SHIPMENT JUST ARRIVED!

Replace your dull, black, dry-rotted intercooler boots with a new set of M7 100% silicone replacements. Add cool looks and stop lost performance from small leaks caused by old age and heat damage. A great low-cost project that's easy to install. Available in black, red, or blue.

Learn More

When using the Stock Crank Pulley ot the M7 Tuning 2% Crank pulley and 16% Supercharger pulley together, it is recommended to use a shorter drive belt or risk slipping or throwing the stock belt. M7 Tuning now offers a shorter-than-stock high performance drive belt that works perfectly with both pulleys! Comparable to the factory MINI JCW belt. 1379mm long.

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

Learn More

This is the drive belt to use when running the M7 Speed 4% Crank pulley and 16% Supercharger pulley together.  1385mm long.

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

Learn More

This is the drive belt to use when running the M7 Speed 4% Crank pulley and stock (on-JCW) Supercharger pulley together.  1423 mm long.

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

Learn More

Direct replacement for the stock (non-JCW) crankshaft & supercharger pulley set-up.

1404mm long

Download our Drivebelt Recommendation Chart for more detailed information on the correct belt choice for your application. CLICK HERE

Learn More

A larger 4% oversize speed increasing crank pulley will add just that little extra added supercharger boost and performance. This beautiful design is a result of advanced computer modeling and high precision CNC machining. Made in the USA from billet 6061-T6 aerospace grade aluminum alloy with a deep black anodize coating, the M7 Speed 4% oversize - speed increasing pulley will provide a lifetime of reliable use. Weighing in at just 13 ounces and supplied with a brand new high strength ARP bolt and precision ground flat washer, the M7 Speed 4% crank pulley is best in class. Each M7 Speed product is Engineered....Tested....and Proven to PERFORM!

Learn More

Cleaning and service kit for the M7 2 stage foam filters used on MAXX-Flo intake, R53 CAI and AGSR-2 intake systems. Learn More

MUST HAVE ITEM

The M7 Water Temperature Kit for all Generation 1 & 2 MINIs is a small addition that easily helps answer the question no one else can; “What is my water temperature?” Installation of this kit will give you peace of mind knowing your engine is running in a safe temperature zone while blasting canyon roads or trying to keep up with the 996 in front of you on track day.

Learn More

Have you ever noticed how crisp and responsive your car was after that initial warm-up period, and wanted to keep that feeling for the rest of the day? The M7 180 deg F [82 deg C] Thermostat is the solution. Not only does the engine maintain its fresh-start power, but also the under-hood temperatures are greatly diminished.

Learn More

NOW COMES WITH A FREE STANDARD CAP! ($15.99 VALUE)

Is your coolant tank leaking? It is or it will be because the Gen 1 MINI suffers from a design flaw.  The plastic pressure tank is mounted directly above the exhaust manifold. And we all know how plastic and heat do not get along. Eventually your OEM tank will fail from the heat-guaranteed. Keep your coolant where you need it most--in your engine--with Canton Racing expansion tanks offered by M7 Speed. Fabricated from heavy gauge aluminum and beautifully TIG welded by American craftsman. Available in raw aluminum, matte black or gloss red.  (Colors are special order)

Learn More

Cut down on the ever-destructive under hood heat in the engine compartment without adding complex, hard to install parts. The M7 Exhaust Heat Shield is custom contoured and fits on top of the factory aluminum heat shield above the exhaust manifold or header of your R50, R52 or R53 MINI Cooper.

Learn More

Torque Solution Engine Mounts: With Torque Solution engine mounts you will see and feel a difference in your vehicle. These mounts are made out of high grade billet aluminum material and steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions. Learn More

NEW PRODUCT-NOW AVAILABLE IN A HIGH LUSTER POLISED FINISH

Just as the plastic coolant tank, the plastic power steering tank is mounted directly above the exhaust manifold.  Installing a M7 Speed designed and Canton Racing manufactured power steering tank provides bullet-proof strength, reliable performance  and awesome looks. Match this with your Canton water tank and you have a show stopping look that is only seen on hotrods and show cars.

Learn More

Power Up Supercharger Drive Kit | Instant Bolt-On Gen 1 Horsepower

Kit includes: M7 Speed 16% Overdrive supercharger pulley, M7 Speed 4% Lightweight Overdrive crank pulley, Proper length Micro-V Drive belt for this pulley combination. Add NGK Spark Plugs and save an additional $10

Learn More

Make Driving FUN Again! Install a PowerPedal.

PowerPedal is the latest technology based performance upgrade, specifically designed for enthusiasts looking to take their driving experience to the next level. Using innovative digital technology and a SmartPhone App the PowerPedal attaches to the OE drive by wire throttle pedal with OE mating plug adapters. After a simple 5 minute installation your MINI’s performance is significantly increased.

With years of experience in the field of performance upgrades and the use of advanced technology, Interstar has developed a product that allows for an increase in performance of up to 30%, without compromising the engine’s reliability or voiding the manufacturers warrantee. PowerPedal was developed to optimize the engine’s power and torque, providing unparalleled acceleration and a better driving experience.

Simple 5 minute installation and world class phone app lets you choose between four power settings to customize your driving style.  The Powerpedal will not affect your emissions systems nor can it be detected during emissions testing.

Watch the Video HERE

Learn More

The M7 Speed Standard Diameter, lightweight direct replacement crank pulley will add power, acceleration and performance to your MINI. Weighing in at a scant 16.4 ounces, (an amazing 88.5% less than factory) the lightweight M7 Speed Standard Diameter Crank Pulley reduces crankshaft rotational mass which equals additional increased horsepower, torque and throttle response. This is a DIRECT REPLACEMENT PART for the factory OE crankshaft pulley which always fails. can be used on the non supercharged R50 or R52 Generation 1 MINIs or the supercharged R52S and R53 generation 1 MINIs. 

Each M7 Speed product is Engineered....Tested....and Proven to PERFORM!

Learn More

PREVENTS CARBON BUILD-UP

Filter out the performance robbing oil mist in your crankcase vent system. This oil mist creates an oil film in critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical to maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance. Install an M7 "Engineered...Tested...Proven" Oil Catch Can System today!

Learn More