GEN 1 Performance Power Pak (R53) | 53-3M7702

PERFORMANCE POWER PACK for GEN 1


PERFORMANCE POWER PAK FOR GEN 1 INCLUDES:



  • M7 Speed 16% Overdrive Supercharger Pulley

  • M7 Speed 4% Ultra Lightweight Crank Pulley

  • M7 Speed 180 Deg F (82 Deg C) Thermostat

  • Micro-V drive belt - correct length for your pulley selection

  • NGK Iridium Spark Plugs (Set of 4) 

  • M7 Speed 100% Silicone Intercooler Boots (Red, Blue, Black or Lime Green)


With well over a decade of experience, the tuning experts at M7 have carefully hand picked these six components to work in harmony to produce good reliable power increase with a 100% bolt-on kit. 


 

SKU: 53-3M7702

Availability: In stock

Regular Price: $517.00

Sale Price $398.09

* Required Fields

OR

  • Attention California Residents - Proposition 65

    WARNING -

    Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Details
    Details

    PERFORMANCE POWER PAK FOR GEN 1 INCLUDES:

    • M7 Speed 16% Overdrive Supercharger Pulley
    • M7 Speed 4% Ultra Lightweight Crank Pulley
    • M7 Speed 180 Deg F (82 Deg C) Thermostat
    • Micro-V drive belt - correct length for your pulley selection
    • NGK Iridium Spark Plugs (Set of 4) - Standard, +1 Colder, +2 Colder available
    • M7 Speed 100% Silicone Intercooler Boots (Red, Blue, Black or Lime Green)

    With well over a decade of experience, the tuning experts at M7 have carefully hand-picked the components for each kit so that they work in harmony to produce the highest power levels. They are also designed to meet strict reliability standards.

    Our Performance Power Pak includes our exclusive 16% Supercharger pulley or 4% Crank pulley, a proper length Drive Belt and our 180oF thermostat along with the proper NGK Iridium Spark Plugs a set of 100% silicone intercooler boots (available in four colors).

    M7 prides itself on using only the finest materials to produce their products. We carefully select our partners that meet our same strict standards. You can count on every part in our kits to be of the best quality and design, regardless of price.As a bonus, each kit is priced to save you money when compared to buy the parts individually.

    About our 16% Pulley When M7 was looking to add a pulley to our existing product offering, we realized that it had to be better and have that M7 "out-of-the-box" engineering and mindset. The M7 Supercharger Technology Pulley features a 16% reduction and a number of improvements over stock and other aftermarket pulley designs.Our revised design for 2014 allows the pulley to be easily positioned deeper onto the supercharger shaft for proper belt alignment. We added shoulders to the outside of the pulley to help prevent the belt from walking off of the pulley surface if you have a weak tensioner or the belt stretches at extreme RPM events. Our proprietary taper-loc shaft locking system offers the highest locking force to the supercharger shaft at the lightest weight. The M7 taper-loc is superior to any other design on the market....PERIOD! This high grip taper-lock system offers both ease of installation and slip free supercharger performance. By design, the assembly is 100% balanced out of the box. The drive belt grooves are machine to exacting SAE-J1459 specifications.

    The M7 Overdrive Pulley also incorporates an active cooling system that pulls in cool air through the holes in the pulley shoulder, keeping belt temperature down. Made from high quality aircraft grade materials and plated for life long corrosion resistance and years of trouble-free performance. 

    About our 4% Crank Pulley  This beautiful design is a result of extensive computer modeling and CNC machining. A hard anodized coating was added to protect your investment from the elements and ensure a lifetime worth of use. The V-Belt grooves are machined to exacting SAE-J1459 specifications for minimum belt slippage at maximum boost. At 12 ounces, the lightweight M7 4% Crank Pulley assists in reducing rotational mass, which in turn increases horsepower, torque and throttle response. Use this in combination with the M7 16% Supercharger Technology Pulley for maximum performance and boost yourself to the next level of MINI tuning and performance. Now comes with a brand new high quality ARP bolt and hardened washer for an extra level of assurance.

    About our Thermostat Have you ever noticed how crisp and responsive your car was after that initial warm-up period, and wanted to keep that feeling for the rest of the day? The M7 180oF Thermostat is the solution. Not only does the engine maintain its fresh-start power, but the under-hood temperatures are greatly diminished as well (see comparison table below). Now when your car sits after a hard run, it won't cook and dry out everything under the hood. This is great for the MINI owner who lives in a hot climate, or those that push their cars hard at the track or local twisty road.

    Please Note: The M7 Thermostat does not include a replacement gasket. Reuse the gasket from the OEM thermostat (this is easiest to remove when the vehicle and thermostat are cold).

    Cold Weather Alert: If you encounter weather below 50oF or 10oC, please be aware that the ECU could throw a check engine light. This is no cause for alarm as the sensors are registering an anomaly and the thermostat is not harming the engine. The check engine light can be reset with a diagnostic tool or left as is. Please call if you have questions.

    PROUDLY MADE IN THE USA

    Fitment
    Fitment Notes :

    YEARMAKEMODELSUB-MODELENGINE
    2008MINI CooperConvertible (R52S)SL4 1.6L Supercharged
    2007MINI CooperConvertible (R52S)SL4 1.6L Supercharged
    2006MINI CooperConvertible (R52S)SL4 1.6L Supercharged
    2006MINI CooperHatchback (R53)SL4 1.6L Supercharged
    2006MINI CooperHatchback (R53)S JCWL4 1.6L Supercharged
    2005MINI CooperConvertible (R52S)SL4 1.6L Supercharged
    2005MINI CooperHatchback (R53)SL4 1.6L Supercharged
    2005MINI CooperHatchback (R53)S JCWL4 1.6L Supercharged
    2004MINI CooperHatchback (R53)SL4 1.6L Supercharged
    2004MINI CooperHatchback (R53)S JCWL4 1.6L Supercharged
    2003MINI CooperHatchback (R53)SL4 1.6L Supercharged
    2003MINI CooperHatchback (R53)S JCWL4 1.6L Supercharged
    2002MINI CooperHatchback (R53)SL4 1.6L Supercharged
    Downloads
    Additional Info
    Additional Info
    Manufacturer M7 Speed
    Color No
    Mfg's Part # 53-3M7702
    Shipping Weight 6.0000
    Length 12
    Width 12
    Height 4
    Country of Manufacture United States
    Reviews
    Customer Reviews (4)
    Yes
    Quality
    Value
    Would Recommend
    Everything went on well and all the parts work great. Only complaint is the crank rattle. Quick delivery. Review by Or53C (Posted on 6/19/2018)
    Good
    Quality
    Value
    Would Recommend
    Parts look great just took a little bit longer than expecting on shipping Review by Trawwww (Posted on 12/18/2017)
    I give you five stars
    Quality
    Value
    Would Recommend
    Very good quality except a part that still does not get me but everything else very well Review by R53-Beto (Posted on 11/17/2017)
    Great product
    Quality
    Value
    Would Recommend
    I installed everything but was a little disappointed in overall performance. I seam to have more boost with just the small supercharger pulley. Review by John (Posted on 8/31/2017)
    Write Your Own Review
    You're reviewing: GEN 1 Performance Power Pak (R53) | 53-3M7702
    How do you rate this product? *
      1 star 2 stars 3 stars 4 stars 5 stars
    Quality
    Value
    Would Recommend
    Tags
    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Other Products
    You may also be interested in the following product(s)
    M7 Speed Stage I Ignition Kit | Gen 1 2002-2006 (All) M7 Speed Stage I Ignition Kit | Gen 1 2002-2006 (All)
    2 Review(s)

    Regular Price: $248.00

    Sale Price $198.40