New-23%

Oil Catch Can Kit | Black Billet Aluminum | 2007-2010 R55-R56-R57 N14B Engine | 56-3M7303

PREVENTS CARBON BUILD-UP | NEW-REDESIGNED MOUNTING-FITS FACTORY AIR BOX


Filter out the performance robbing oil mist in your crankcase vent system. This oil mist creates an oil film in critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical to maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance. Install a M7 Engineered....Tested....& Proven Oil Catch Can System today!

SKU: 56-3M7303

Availability: In stock

Regular Price: $212.00

Sale Price $163.24

OR

  • Attention California Residents - Proposition 65

    WARNING -

    Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Details
    Details

    The newly updated R55 through R57 Oil Catch Can kit for MINIs equipped with the N12 or N14 engine comes with a "designed-to-fit" stainless steel bracket, mounting hardware and pre-assembled hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit has been redesigned to fit on the firewall directly behind the outlet of the airbox.  It uses the factory tab located on the firewall.

    "Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves.  Because the 2007 & up MINI is direct injection the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns onto the intake valves and builds up into a flow choking hydrocarbon mess.  The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.

    By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!.  The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.

    Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets installation is super-easy.

    Features:

    • Pre-assembled hose assemblies.
    • Stainless steel bracket and mounting hardware
    • Eliminate intake tract oil contamination, carbon build-up and intave valve damage.
    • Prevent pre-mature sensor failure
    • Keep engine performance at peak levels
    • Billet Aluminum Construction
    • Bright Black Anodized Finish
    • Laser Etched M7 Logo

    The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.

    All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are available on this page in .PDF format. The design includes an oil drain plug and an easy to view sight tube which indicated the oil level within the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that use silicone hoses because oil and silicone are not compatible. Silicone hoses will will eventually deteriorate and make an absolute mess of your engine compartment.

    By the best....Buy M7 Speed products!

    Engineered.....Tested.....& Proven to PERFORM!

    We are MINI Cooper Performance Experts

    Fitment
    Fitment Notes :Fits all 2007-2010 "S" MINIS with N14B Turbo engine equipped with factory or aftermarket airbox and fresh air hose in place. Will fit Non-Turbo N12 engines but minor modifications to kit will be required by the end user.

    YEARMAKEMODELSUB-MODELENGINE
    2012MINI CooperClubman (R55)S JCWL4 1.6L Turbocharged (N14)
    2012MINI CooperConvertible (R57)S JCWL4 1.6L Turbocharged (N14)
    2012MINI CooperHatchback (R56)S JCWL4 1.6L Turbocharged (N14)
    2011MINI CooperClubman (R55)S JCWL4 1.6L Turbocharged (N14)
    2011MINI CooperConvertible (R57)S JCWL4 1.6L Turbocharged (N14)
    2011MINI CooperHatchback (R56)S JCWL4 1.6L Turbocharged (N14)
    2010MINI CooperClubman (R55)SL4 1.6L Turbocharged (N14)
    2010MINI CooperClubman (R55)S JCWL4 1.6L Turbocharged (N14)
    2010MINI CooperConvertible (R57)SL4 1.6L Turbocharged (N14)
    2010MINI CooperConvertible (R57)S JCWL4 1.6L Turbocharged (N14)
    2010MINI CooperHatchback (R56)SL4 1.6L Turbocharged (N14)
    2010MINI CooperHatchback (R56)S JCWL4 1.6L Turbocharged (N14)
    2009MINI CooperClubman (R55)SL4 1.6L Turbocharged (N14)
    2009MINI CooperClubman (R55)S JCWL4 1.6L Turbocharged (N14)
    2009MINI CooperConvertible (R57)SL4 1.6L Turbocharged (N14)
    2009MINI CooperConvertible (R57)S JCWL4 1.6L Turbocharged (N14)
    2009MINI CooperHatchback (R56)SL4 1.6L Turbocharged (N14)
    2009MINI CooperHatchback (R56)S JCWL4 1.6L Turbocharged (N14)
    2008MINI CooperClubman (R55)SL4 1.6L Turbocharged (N14)
    2008MINI CooperHatchback (R56)SL4 1.6L Turbocharged (N14)
    2007MINI CooperHatchback (R56)SL4 1.6L Turbocharged (N14)
    Downloads
    Additional Info
    Additional Info
    Manufacturer No
    Color Carbon Fiber
    Mfg's Part # No
    Shipping Weight 5.0000
    Length 8
    Width 8
    Height 8
    Country of Manufacture
    Reviews
    Customer Reviews (7)
    Great product, easy to install
    Quality
    Value
    Would Recommend
    Arrived on the day stated, quick easy install with good directions. Fit perfectly in already existing hole no drilling, looks and fits under hood like oem part. Review by StreetAssassin (Posted on 4/17/2019)
    Great value
    Quality
    Value
    Would Recommend
    Easy to install. Nice clean look Review by Oscar (Posted on 6/26/2018)
    Awesome
    Quality
    Value
    Would Recommend
    Awesome. My MINI seems to run smoother? Got to love it. High quality and simple to put on. Review by Mario Jr (Posted on 5/22/2017)
    Oil Catch Can Kit
    Value
    After I ordered it, part became out of stock, they gave me the upgrade at no extra cost. Review by azarby (Posted on 5/1/2017)
    Oil Catch Can Kit
    Value
    After I ordered it, part became out of stock, they gave me the upgrade at no extra cost. Review by azarby (Posted on 5/1/2017)
    Nice
    Quality
    Value
    Would Recommend
    Simple to install. Looks great and fit good. We will see if it works. Review by Drivin'Dave (Posted on 3/7/2017)
    Good quality
    Value
    I just recieved this and installed it in my daughters 2007 MCS. Will see if the helps with the coaking issue. I am very please with how the hoses came. Having the hose cut to leaght and adapters installed already was a nice touch. The over all quality seems to be nice. My only concern is no baffling, but in time I will see how this OCC functions.
    Review by Bradley (Posted on 3/25/2016)
    Write Your Own Review
    You're reviewing: Oil Catch Can Kit | Black Billet Aluminum | 2007-2010 R55-R56-R57 N14B Engine | 56-3M7303
    How do you rate this product? *
      1 star 2 stars 3 stars 4 stars 5 stars
    Quality
    Value
    Would Recommend
    Tags
    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.