Fiberglass Vortex Scoop | Gen 2
Now back by popular demand!
The M7 Speed fiberglass Vortex 2 Scoop replaces the stock hood scoop with a larger opening, taller top leading edge and more aggressive styling. Three unique teardrop flow straighteners on the base of the scoop enhance air flow rushing into the scoop's opening. Enhance the appearance of your MINI and at the same time help cool your engine compartment and rid it of power robbing and distructive heat. Easy to Install. Requires final prep and paint.
Also available in Carbon Fiber HERE
Availability: In stock
Attention California Residents - Proposition 65
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The very popular Vortex 2 Hood Scoop RETURNS.
After two years of redesign, making new prototypes, qualifying new suppliers and making new tooling the VORTEX SCOOP RETURNS. With its distinctive wide mouth profile and three tear dropped flow straighteners on the scoop base it duplicates the original in style and function.
This fiberglass model is completely finished, supplied with a single layer and ready for your final paint color. The initial quantities of these scoops is very limited so order one today before we run out and you will have to wait for the next shipment to arrive.
Let's face it: the stock plastic hood scoop just isn't delivering looks or function to your beloved MINI. Don't worry, M7 has you covered once again. The M7 Vortex Scoop is designed for the R55 through R59 S model MINIs! While this scoop was intended to be used with the M7 MAXX-FLO, AGS-R and M7 Super AGS intake systems in mind, it has been used by owners looking to improve the appearance of their Gen 2 MINI and at the same time improve the underhood cooling to rid it of power robbing and parts destroying heat. By design the M7 Vortex 2 Scoop adds a ton of ram air cooling to the engine bay.
This Vortex Scoop replaces your stock hood scoop with a larger opening and more aggressive appearance. Tear drop flow straighteners are placed on the floor of the inlet surface to enhance air flow rushing into the scoop's opening. This is the perfect upgrade for those who want to replace the deformed factory non-functioning scoop with a uniquely designed functional replacement. The M7 Vortex scoop will deliver more air than your stock hood scoop helping to keep engine and intake temperatures down.
And it looks Awesome!! With its aggressive stance and added flow straighteners it will set your MINI apart from the crowd.
This scoop is carefully made from commercial grade fiberglass material so only the highest quality product finish ends up on your MINI's hood. It is then coated with multiple layers of UV resistant automotive grade clear and buffed to a high gloss finish. Adding the M7 Carbon Fiber Vortex 2 scoop to your car will make you the envy of your MINI buddies!
- Manufactured from carbon fiber and hybrid backup materials
- Clear coated with automotive grade product and buffed to a high gloss finish.
- Flow area = 25.0 square inches
- Overall height = 2 1/2" at center-line of hood
- Tear drop flow straighteners add style and function
- Easy 30 minute installation.
- Scoop is supplied in black primer finish. It requires final preparation and painting.
- Drilling required. One 1/4" hole will need to be drilled under the scoop mounting surface for proper attachment of the scoop to the hood.
- 100% Ready to install.
- Includes all hardware and 3M VHB bonding tape.
- All parts are 100% inspected as acceptable for fit and finish prior to shipment.
|Mfg's Part #||No|
|Country of Manufacture||United States|